Power over Ethernet Hat for the Raspberry Pi 3B+/ 4B with up to TBD W output at 12 V

Power over Ethernet Hat for the Raspberry Pi 3B+/ 4B with up to TBD W output at 12 V
Power over Ethernet Hat for the Raspberry Pi 3B+/ 4B with up to TBD W output at 12 VPower over Ethernet Hat for the Raspberry Pi 3B+/ 4B with up to TBD W output at 12 V
  • 150.00
    €
    excl. VAT, excl. delivery
  • Variant
    SBCPoE RPi 3B+/ 4B high power
  • SKU
    sbcpoe-rpi-hp
  • Quantity
  • Out of stock

A PoE hat for the Raspberry Pi 3B+/ 4B single board computer with high power output.

Highlights

  • Supports 10/100/1000MBit/s ethernet speeds
  • IEEE 802.3af and 802.3bt compliant
  • Low profile and thus compatible with many standard RPi enclosures
  • Overload protection
  • TBD W power delivery
  • 12 V output via screw socket to power other devices
  • High efficiency enabled by active bridge rectifier
  • No power issues like the original PoE hat had

Specifications

Maximum output Power TBD W
Maximum output Current TBD A
Supported PoE Standards 802.3af and 802.3bt
Output Ripple and Noise 95 mVpp
Dimensions WxHxD 65.1 x 56.1 x 60.3 mm
Weight 150 g
Temperature Range (environment) -40 to 70° C maximum
-40 to 50° C recommended
Short-Circuit Duration ∞
Efficiency of PoE part (typical) > 80%
Certifications CE
Materials RoHS, REACH

Kit Contents

  • PoE hat
  • 2x nylon standoff spacers

Set-up

  1. Disconnect any other power source from the Raspberry Pi and leave it disconnected when using the hat
  2. Insert the standoff spacers and snap on the hat
  3. Connect a 802.3af or 802.3bt compliant PoE injector (usually an ethernet switch) to the RPi ethernet jack